SoundLAB Knuckle Type Swivel Wall Bracket : Does the job, just

Basic, unobtrusive, uncomplicated to alter. A good bracket, in sound steel. Very good sideways angle of adjustment if required.

Easy and superior potent all steel construction supports the fat , no plastic sections to split or break up when screwing to the wall.

I wished these mainly because i required to wall mount my wharfdale diamonds, most of the wall mounts you see now ether have a particular manufacturer in head or are manufactured out of one particular inch sq. tube steel clamps with a thirty kilo load restrict. I could not come across a far better mount for the value any place and they perform just high-quality for me. I consider wharfdale diamonds and comparable are appropriate on the edge of these brackets abilities. And to reply some of the other reviewers detrimental points concerning the restricted angle adjustment to avoid the side of the speaker hitting the wall in advance of you achieve your wanted angle, basically mount the bracket off centre on the again of the speaker. Of course this won’t function if your speaker has mounting holes already, but as i was employing wood screws i just mounted the bracket biased towards the aspect that i wanted the speaker to tilt toward. These mounts are not ridged they bounce like a nodding canine when knocked. But for the money and the metal guage, i wouldn’t hope them to be. As i said, 5 kilos is an complete most, just after that you can expect to have to glance for some of those 30 quid, thirty kilo positions i described earlieri thinks these are excellent, exceptionally fantastic benefit and moderately discreet when installed.Here are the specifications for the SoundLAB Knuckle Type Swivel Wall Bracket:

  • Enter your model number
    above to make sure this fits.
  • Knuckle Type Swivel Speaker Wall Brackets
  • Simple but effective knuckle brackets for supporting smaller speaker cabinets; swivels up/down, side to side
  • Will support loads up to 5kg.
  • Priced and sold in pairs.

Received these to put some older heavy speakers on my walls and they are wonderful. They do what is needed and are neat and simple to install.

I feel the to start with thing to say is that they do the work – i’ve connected a few of speakers to the wall with them. Nevertheless, as the past reviewer indicates they are not straightforward to change so that the two match up in terms of slope and course, and which is with a reasonably tiny pair of speakers (about 20cm higher). There will not seem to be to be a enormous volume of alternative if your speakers never have the mounting points that many fashionable types do, so on that foundation i am satisfied with the decision i designed.

Reviews from purchasers :

  • hearing in stereo
  • Does the job, just
  • Simple, unobtrusive, easy to adjust

These are truly neat and straightforward to put in: only point you have to have to do is do the job out the angle you want the speaker at (vertical and horizontal) and hence the precise mounting posture for the bracket. For the reason that the bracket isn’t going to stand off the wall quite far, you can obtain the corner of the speaker hits the wall right before you have turned it to the angle you want. They’re amazing although since they are thoroughly concealed behind the speaker alone. It’s just good to get a first rate stereo seem just after 4 many years of possessing the speakers on the ground.

One thought on “SoundLAB Knuckle Type Swivel Wall Bracket : Does the job, just

  1. This review is from : SoundLAB Knuckle Type Swivel Wall Bracket for Speaker

    Simple, unobtrusive, easy to adjust. A great bracket, in solid steel. Good sideways angle of adjustment if needed.
  2. This review is from : SoundLAB Knuckle Type Swivel Wall Bracket for Speaker

    Got these to put some older heavy speakers on my walls and they’re great. They do what is required and are neat and easy to install.
    • I wanted these because i wanted to wall mount my wharfdale diamonds, most of the wall mounts you see now ether have a specific brand in mind or are constructed out of one inch square tube steel clamps with a thirty kilo load limit. I couldn’t find a better mount for the price anywhere and they work just fine for me. I think wharfdale diamonds and similar are right on the edge of these brackets capabilities. And to answer some of the other reviewers negative points regarding the limited angle adjustment; to avoid the side of the speaker hitting the wall before you attain your desired angle, simply mount the bracket off center on the back of the speaker. Obviously this won’t work if your speaker has mounting holes already, but as i was using wood screws i just mounted the bracket biased toward the side that i wanted the speaker to tilt towards. These mounts aren’t ridged; they bounce like a nodding dog when knocked. But for the money and the steel guage, i wouldn’t expect them to be. As i said, five kilos is an absolute maximum, after that you’ll have to look for some of those thirty quid, thirty kilo jobs i mentioned earlieri thinks these are great, exceptionally good value and reasonably discreet when installed.
  3. This review is from : SoundLAB Knuckle Type Swivel Wall Bracket for Speaker

    Simple and good strong all steel construction supports the weight , no plastic parts to break or split when screwing to the wall.
  4. This review is from : SoundLAB Knuckle Type Swivel Wall Bracket for Speaker

    I think the first thing to say is that they do the job – i’ve attached a couple of speakers to the wall with them. However, as the previous reviewer suggests they aren’t easy to adjust so that the two match up in terms of slope and direction, and that’s with a relatively small pair of speakers (about 20cm high). There doesn’t seem to be a huge amount of alternative if your speakers don’t have the mounting points that many modern ones do, so on that basis i’m happy with the choice i made.
    • These are really neat and easy to install: only thing you need to do is work out the angle you want the speaker at (vertical and horizontal) and thus the exact mounting position for the bracket. Because the bracket doesn’t stand off the wall very far, you can find the corner of the speaker hits the wall before you’ve turned it to the angle you want. They’re brilliant though because they’re totally hidden behind the speaker itself. It’s just great to get a decent stereo sound after 4 years of having the speakers on the floor.

Comments are closed.