B-Tech BT332 Home Cinema Speaker Wall Mounts : Nice and sturdy but

These are compact wall mounts created in plastic and steel. I am utilizing them with wharfdale diamond nine speakers. They are rated up to 5kg for each speaker, but not to certain about that. five kg each , and the clamping screw has to be performed up extremely tightly. You do get a very good collection of fixing screws. It would have been much better if the ball joint had been textured and not polished. However they do the job very perfectly.

You require to definitely crank them restricted if your speakers are at the higher finish of the weight limit but they get the job done great and are a secure, neat and tidy way to mount screens on a wall.

Utilised a person so considerably on a reasonably big centre speaker earlier mentioned the tv set, was doubtful whether or not it would hold it as owing to the amount of money the speaker sticks out, there’s rather a bit of leverage. But it does, hasn’t moved at all. A very little fiddly to put jointly but not as well undesirable if you are moderately helpful. Significantly less costly than maker have mounts.Here are the specifications for the B-Tech BT332 Home Cinema Speaker Wall Mounts:

  • Designed for home cinema speakers up to 5kg (11lbs)
  • Features +/-20° tilt adjustment and 180° swivel
  • Includes adaptors for keyhole, single point and dual point fixings
  • No visible wall fixing screws
  • Supplied in pairs

Simple to set up, fantastic for speakers underneath 3 kg. . Seriously fantastic excellent for the rate. These are no higher-close wall mounts, but the cost viewed as these are amazing. They are best for mounting my wharfedale diamond 9. Set up was easy, took only few of minutes and all the things (which includes screws and so forth. ) was provided in the package.

Unobtrusive and effortless satellite speaker mountings. Two pairs of these bt332 black wall mounts are currently being made use of with the 4 little corner satellite speakers of a logitec z-906 surround technique. The coupling amongst the two plastic clamp pieces securing the steel wall bracket to the speaker’s steel ball-mount post lets for a huge variety of motion (± 20° vertically, 180° horizontally) which is really effortlessly adjusted. The massive knob supplementing the clamp screw can make securing them uncomplicated when appropriately positioned and the weight of these speakers is not also a lot for the clamp to hold, provided the star washer is effectively positioned. Set up was uncomplicated a couple of screws protected each of the wall brackets in the right place in the room (earlier found by demo and error with the speakers just propped up in position in the course of a several months of thorough listening), and the ball-mounts have a little footprint on the back of the speaker so allowing free of charge entry to the terminals for the wires. The z-906 satellite speakers have a threaded gap on the back which utilizes the unc 1/4′ screws supplied for fixing to the ball-mounts. M5 and m6 screws are also provided. Get care not to eliminate the small screw finding the back of the top fifty percent of the clamp to the wall bracket, this helps prevent the assembly from staying lifted off the bracket. This is the next installation of these i have performed now, the previous set of five and the 1st z-906 have been difficulty-cost-free for the final few yrs. It is well worth purchasing all over as the prices of these superb mounts can differ considerably.

Reviews from purchasers :

  • Excellent Wall mounted speaker brackets
  • Not so good for larger speakers.
  • Stronger and much cheaper than the Bose brackets
  • Strong and versatile
  • Unobtrusive and convenient satellite speaker mountings
  • Excellent product

Excellent solution will work pretty very well maintaining the speakers very close to the wall with a lot of movement.

A terrific bracket for the lesser type hi-fi speaker. Well designed and sturdy experienced reservations when obtaining nonetheless when received and opened offer quickly realised there would be no issues whatsoever. Easy to put collectively, drilled a couple holes and connected them to the speakers and hey presto, wall mounted speakers.Speakers are both of those remaining to proper movable and tilt ready outstanding task in fact and quite superior price for funds.

One thought on “B-Tech BT332 Home Cinema Speaker Wall Mounts : Nice and sturdy but

  1. Unobtrusive and convenient satellite speaker mountings. Two pairs of these bt332 black wall mounts are being used with the four small corner satellite speakers of a logitec z-906 surround system. The coupling between the two plastic clamp parts securing the metal wall bracket to the speaker’s metal ball-mount post allows for a wide range of movement (± 20° vertically, 180° horizontally) which is very easily adjusted. The large knob supplementing the clamp screw makes securing them easy when correctly positioned and the weight of these speakers is not too much for the clamp to hold, provided the star washer is correctly positioned. Installation was simple; a couple of screws secure each of the wall brackets in the right place in the room (previously found by trial and error with the speakers just propped up in position during a few months of careful listening), and the ball-mounts have a small footprint on the back of the speaker so allowing free access to the terminals for the wires. The z-906 satellite speakers have a threaded hole on the back which uses the unc 1/4″ screws supplied for fixing to the ball-mounts. M5 and m6 screws are also supplied. Take care not to lose the small screw locating the back of the top half of the clamp to the wall bracket, this prevents the assembly from being lifted off the bracket. This is the second installation of these i have done now, the previous set of five and the first z-906 have been trouble-free for the last few years. It is worth shopping around as the prices of these excellent mounts can vary considerably.
  2. This review is from : B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

    Excellent value for money, these speaker wall mounts are great for smaller speakers and hold them firmly in your chosen position. I had a pair of small surround sound speakers to mount and this mounting kit was the perfect solution. The mounts are small and come with all the wall mounting screws and rawplugs, as well as speaker attachment screws. I was able to mount both brackets on wood which made the process of installation much quicker and easier than if i’d had to drill my walls. I used the supplied wood screws and the brackets were up in under 5 minutes. Next i fixed the speakers to the speaker mounts (these slide easily off the wall brackets) and put them back onto the wall mounted brackets where they are retained by a screw on top. Finally i loosened the screw that allows the speakers to be moved into optimum position before re-tightening it. All done in ten minutes meaning i could now go ahead and run through the surround sound calibration. I’ve tweaked the position of both speakers since then and i’m happy that the brackets are holding them firmly in the positions i’ve put them in. Great value for money and perfect for smaller speakers (mine are about 25cm high, 10cm wide and 10cm deep).
    • Would recommend for the wharfedale dx-1 hcp. Bought this for the satellite speakers for the wharfedale dx-1 hcp. Pretty quick to install and came with the m6 screws i needed to attach the speakers to the bracket. I have had to really tighten them to keep them at the tilt angle i like as they were struggling to keep level. 8kg so i can understand why other reviews have mentioned that with heavier speakers the brackets struggle to maintain the set tilt level.
      • You need to really crank them tight if your speakers are at the upper end of the weight limit but they work fine and are a secure, neat and tidy way to mount monitors on a wall.
  3. This review is from : B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

    Excellent for my wharfedale diamond 9. 0s. Good price and they come with all of the screws needed, they feel strong and sturdy and they hold my speakers easily.
  4. This review is from : B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

    Very good quality, fits key hole slot at rear of. Very good quality, fits key hole slot at rear of panasonic satellite speakers via srews and adapter. Solid brackets, very very quick delivery.
  5. This review is from : B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

    Surround speakers they have both tilt and swivel so great for this. Using these for surround speakers they have both tilt and swivel so great for this.
  6. This review is from : B-Tech BT332 Home Cinema Speaker Wall Mounts (Pair) in Black

    Nice brackets, but i got them for the keyhole fitting. The one supplied wouldnt fit, so i had to make up my own fitting.
    • Fits wonderfull for my klipsch speakerset. Can be adapted for all kinds of speakers. Only minus is you can’t conduct cables in it.

Comments are closed.